Aluminum works
production equipment's
|
Description
|
QTY
|
|---|---|
|
Double Head Cutting Machine
|
1
|
|
Automatic cutting machine
|
|
|
Protection Tapping machine
|
1
|
|
Hydraulic Crimping Machine
|
1
|
|
Single head cutting Machine
|
1
|
|
End Milling Machine
|
1
|
|
Drilling Machine
|
2
|
|
Air compressor Screw type machine
|
1
|
|
Air Compressor Type (10 bars)
|
2
|
|
Pneumatic Tighter
|
2
|
|
Pneumatic Drill
|
20
|
|
Pneumatic Riveter
|
20
|
|
Portable Router
|
10
|
|
Portable Pneumatic Punching
|
5
|
|
Portable cutting
|
1
|
Description
- QTY
- Double Head Cutting Machine
- Automatic cutting machine
- Protection Tapping machine
- Hydraulic Crimping Machine
- Single head cutting Machine
- End Milling Machine
- Drilling Machine
- Air compressor Screw type machine
- Air Compressor Type (10 bars)
- Pneumatic Tighter
- Pneumatic Drill
- Pneumatic Riveter
- Portable Router
- Portable Pneumatic Punching
- Portable cutting
- 1
- 1
- 1
- 1
- 1
- 2
- 1
- 2
- 2
- 20
- 20
- 10
- 5
- 1
- 1
Immersion Coating Technique
RAL 1000 Green Beige
RAL 1015 Light Ivory
RAL 1033 Dahlia Yellow
RAL 1001 Beige
RAL 1016 Sulfur Yellow
RAL 1034 Pastel Yello
RAL 1002 Sand Yellow
RAL 1017 Saffron Yellow
RAL 1037 Sun Yellow
RAL 1003 Signal Yellow
RAL 1018 Zinc Yellow
RAL 2000 Yellow Orange
RAL 1004 Golden Yellow
RAL 1019 Grey Beige
RAL 2001 Red Orange
RAL 1005 Honey Yellow
RAL 1020 Olive Yellow
RAL 2002 Vermilion
RAL 1021 Rap Yellow
RAL 2003 Pastel Orange
RAL 1007 Daffodil Yellow
RAL 1023 Traffic Yellow
RAL 1011 Brown Beige
RAL 1024 Ochre Yellow
RAL 1012 Lemon Yellow
RAL 1027 Curry
RAL 2009 Traffic Orange
RAL 1013 Oyster White
Comprehensive Overview of Key Machinery at the Aluminum Factory.
DOUBLE HEAD SAWING MACHINE "BLITZ ALVA 500M"
LECTRO PNEUMATIC COPY ROUTER
• Spindle speed 12.000 rpm
• Horizontal clamps with safety valves
• Tool lubrification by atomizer
• Spindle slides cemented and round guide-ways with movement
along recirculating ball bearings
• Axis translation by indirect levers
• Pneumatic tracer
• Possibility of machining with copying jigs or mechanical stops
• Milling tool shank clamping size: from 5 to 8 mm (with collet change)
• Safety valves for clamps
• Double working pressure servo-controlled in low pressure
• Quick spindle stop for tool changing
• Three phase motor 0,73 kW(1 HP) -2.800 eurovoltage rpm 230/400V –
50Hz;275/480V – 60 Hz
• Air filter
• Working pressure: 7 bar
• Air consumption per work cycle 2,8 Nl
RIABLE ANGLE END--MILLING MACHINE
TECHNICAL SPECIFICATIONS
• End milling angle 45° Rh – 90° – 45° Lh and intermediate angles
• Milling tool unit rotation speed 7000 rpm.
• Set up to take integral safety guard around bar being machined
to provide maximum noise abatement
• Automatic feed with rapid approach controlled by milling tool
unit photocell (Mistral 26 A) or manual (Mistral 26)
• Patented system that allows profile positioning without the need
for goniometers
• Max. milling tool size Ø175 mm
• Integral worktable safety guard with opening lock
• Non-abrasive work table that will not damage painted profiles
• Quick change milling tool unit
• Milling tool unit balancing system
• Milling units magazine with 9 slots
• Maximum milling unit height: 125mm
• Three phase motor: 1.47 Kw (2Hp) – 2800 rpm. – eurovoltage
230/400V– 50Hz; 275/480V – 60 Hz)
• Working pressure: 7 bar
• Work cycle air consumption:
• Mistral 26A = 12 Nl / Work cycle
• Mistral 26 = 0.8 Nl / Work cycle
CRIMPING MACHINE FOR CORNER ASSEMBLY
TECHNICAL SPECIFICATIONS
• Thrust force of the crimping blades 5000 Kg at 7 bars
through pneumatic cylinder
• Working capacity of profiles with max height of 200mm
• Possibility of crimping at two points with standard tools
by height depending on the profile chamber
• Independent adjustment of the two tool units with
decimal number readout showing their position
• Fold-away profile fence – No adjustment required when
profile section being machined is change
Single Head automatic cutting off machine
TECHNICAL DATA
Automatic single head cutting off machine 90° cut
with automatic raising up of the blade for mass
production,
blade’s feeding adjustable, motorised bar feeder with
electronic programmer and unlimited stroke. Cutting
operation completely automatic by means of a
program managed by PLC, counter pieces function.
Carriage sliding
on linear guides, full bale’s guard. Spray mist
lubrication system.
THREE PHASE MOTOR 2.2KW
OVERALL DIMENSIONS : 1500X900X1360
WEIGHT : 440KG
STANDARD EQUIPMENT
• TCT saw Blade Ø450mm
• Pneumatic Clamping set
• Venturi spray mist unit
• Air gun
• Air filter
• Service Spanners
Single Head Aluminium Profile Cutting Machine, Manual type upper head movementsfor degree
• Blade Dia – 450mm.X32X3.4 rpm – 2800
• Angle cutting: 0 – 45 degree
• Lubricant pump – Oil
• Machine weight – 135 KG
SINGLE HEAD SAWING MACHINE
• 400 mm. tungsten carbride saw blade
• Blade safety guard
• Horizontal vices
• Spray mist blade lubrication system
• Prearranged for installation of chip or smoke collectors
CNC MACHINING CENTRE
Taping Machine
The machine was designed for the taping of extrusions having maximum
width 265mm by means of no. 2 film rolls fixed ontwo shafts that are
independent between them, and a couple of rubber rollers to press the film.
Before the machine start, read carefully these instructions and always be
sure that who is operating the machine knows how to deal with it for the
normal use and the maintenance
SCREW COMPRESSOR
AIR DRYER
Heavy Duty Pneumatic Corner Joint Crimping Machine Special for Doors and Windows
TECHNICAL DATA
Adjustable corner size powerful double clamping
system, Adjustable crimping tools suitable to work on
all types of aluminum profiles. With 2 side flexible table
and tools pocket. Controlled by double pneumatic
pedestal control.
• Maximum Crimping force : 3500k
• Knife operating Stroke : 12 mm
• Maximum profile h : 100 mm
• Maximum height : 1200 mm
• Maximum bar : 10
Single head sawing machine with Ø 550 mm front blade andelectropneumatic control of the head tilting
TECHNICAL SPECIFICATIONS
• Ø 550 mm tungsten carbide saw blade
• Cutting lubrication by atomizer
• Oleo-pneumatic advance of the blade (adjustable blade exit speed –
quick return)
• Pneumatic tilting of head around the horizontal axis: 20° RH; 45° RH; 90°;
45° LH; 20° LH
• Pneumatic head intermediate tilting angles using mechanical stops
with dampened support, manually adjustable using an
ample vernier scale
• Quick coupling mechanical stops for Left and Right 45°; 90° position
obtained pneumatically
• Chips recovery by means of dedicated drawer
• Saw blade motor, three phase 3,7 kW – 2800 rpm – eurovoltage
230/400V– 50Hz; 275/480V – 60 Hz
• Motor transmission by belt
• Blade rotation speed: 3.050 rpm
• Saw blade holding spindle Ø 32 mm
• Working pressure: 7 bar
• Air consumption per cycle 26,8 NL
• Prearranged for installation of vertical vices
• Customised devices to clamp special profiles (on request)
• Set up for closed work table
CNC MACHINING CENTRE
The DALI 70 machining centre has been designed to perform boring and milling work on aluminium
and steel profiles. The mechanical specifications of this modern machining centre and of its control
system provide economical use in the production of single pieces.